Thursday, September 19, 2013

YongNuo WRS II C3 Wireless RemoteControl for Canon

In the past, I have posted about the usefulness of a Distant Shutter Release cable or a Timer Distant Controller, which do the task flawlessly as long as you are near to the yongnuo promotion program code camera.

But what takes place if you require to keep a lengthier length from the digital camera, than the cable duration of these units?

There are many reasons you might want to bring about your digicam from a length. Either simply because you want to disguise from small and uneasy to human presence creatures, or since you want to set 1 or a lot more cameras at diverse angles of look at to your matter, but cause them from one particular area.

In this case, you can possibly use the outdated Canon cable extension alternative, where you can insert up to three extension cables to an current Distant Shutter Launch, or use a much more practical Wireless Remote Shutter handle. I can even now bear i n mind the times stumbling on cables, when telephones have been linked with long cables to the wall and how content I was when cordless telephones arrived out.

Of training course you may well say that these days you can manage your digital camera remotely via Wi-Fi, but only a couple of Canon cameras are supporting this characteristic but, in addition you can not set off more than one particular camera at the same time with a smartphone or pad.
So let's see what the Wireless Remote Controller in concern below, has to offer you.

YongNuo Digital is broadly identified to strobists for their decent quality, reduced priced speedlite flash models and radio distant flash triggers. But much more to individuals, they have also introduced a pair of distant camera bring about designs like the WRS II C3.

Packaging & Contents

YongNuo WRS II C3 Wireless Remote Control pack contents

The Wi-fi Distant Shutter Manage set contains of a Transmitter, a receiver and a single CR2 Kind battery for the receiver. The transmitter has a factory put in variety 23A battery within.

The Wi-fi Distant Manufacturer Specification: Product : WRS II C3 Operation : Wi-fi by way of 16 channels Procedure Range  : 100 m (three hundred ft) Open up location Release Modes  : 50 percent push: Automobile-Focus
Entire push: Shutter Release
Full push Hold for three": Bulb mode Transmitter LED Indicators : Inexperienced: Car-Concentrate
Purple: Shutter Release & Bulb Battery Varieties : Receiver: 1 CR2
Transmitter: 1 23A Battery Ability : Receiver: ~a thousand hrs standby
Transmitter: ~ 20000 activations Measurement (H x W x D) : Receiver: 74mm X 23mm ∅ ( two.91" X .nine" ∅ )
Transmitter: 105mm X 38mm X 19mm ( 4.32" X one.five" X .74" ) Web Excess weight with batteries : Receiver: 30 gr ( one.06 oz )
Transmitter: 45 gr ( one.fifty nine oz ) Receiver Cable Size : 15 cm ( five.9" ) Transmitter Antenna Length : eighteen cm ( 7.09" ) Connector Variety: N3 Quick distant manage socket. Suitable cameras: All Canon EOS-1D sequence, All EOS 5D collection, EOS 6D, EOS 7D, EOS 70D, EOS 60D, EOS 50D, EOS 40D, EOS 30D, EOS 20D, EOS 10D, EOS D60, EOS D30
The YongNuo WRS II C3 operates like a cordless mobile phone and can trigger the digicam shutter release remotely from a length of a hundred m (300 ft) in open up area area. With its lower voltage and power conserving layout, does not call for frequent battery adjustments as the receiver standby time is about 1000 hours and the distant manage can set off the shutter about 20,000 moments with same battery.

The communication channel modify characteristic could show benef icial if there are a number of photographers utilizing this kind of WRS's doing work close by or if you want to control much more than one particular cameras, each and every to be induced independently. You can also control a established of cameras using extra receivers, by syncing the channels among the transmitter and the receivers.
Even more, a channel may be altered to steer clear of malfunction because of overlapping indicators from other products as wireless/cordless telephones.
The receiver YongNuo WRS II C3 receiver battery installation

Considering that the Receiver battery arrives separately wrapped in the package its installation is the very first precedence. The round battery door is located at the base of the receiver and is outfitted with a mod est latch. There is no polarity sign everywhere, so the battery must be inserted judging from the spring in the battery slot. The unfavorable (-) pole goes in and the positive (+) pole faces the doorway. Press in the battery and close the doorway, which locks routinely.

Although quite lightweight, the Receiver lacks any type of attachment mechanism on the camera, as e.g. a very hot shoe foot present on related devices, and depends entirely on its snugly fitting plug to stay linked with the digital camera. I am not actually a admirer of hot shoe attachments for non flash use possibly. So a locking plug would be the greatest remedy.

The Transmitter 

Making use of with a Digicam

Connecting with the Camera is a easy method that can be described in a few steps:

Switch off the camera. Make sure the receiver and transmitter are on the exact same channel by examining the DIP change positions on each. Link the receiver's N3 plug to your camera's remote manage socket. Press the little round button on the receiver to change it on. There is an audible simply click when the button is pressed even though the red Energy LED must remain on. Then flip the camera back on. Urgent the Shutter button halfway activates Auto-Target. (Indicated by Environmentally friendly LED)
Pressing it all the way releases the shutter. (Indicated by Purple LED)

Bulb Mode Activation:
1. Swap the camera to Bulb method [B].
2. Press the Shutter button all the way for 3 seconds right up until the Purple LED on the Transmitter goes off.
three. The Receiver is set in bulb manner now, as indicated by its Red LED which stays on.
4. Right after your timed publicity expires, press the Transmitter Shutter button once again to near the shutter.

Continuous Travel Activation:
one. Change the digicam to steady push mode.
two. Press the Shutter button all the way to release shutter constantly. (Up to 3 seconds)
If you want the digital camera to preserve rolling for more than three seconds, then follow measures 2-four as in Bulb mode earlier mentioned.

Very low value in comparison to similar remedies.
Very great good quality for the price.
Prolonged distance transmission up to 100 m (300 ft) in open up space region.
Reduced energy intake, prolonged long lasting batteries.

Non totally compatible N3 plug.
Absence of attachment system.

I have put in fairly a long time with the YongNuo WRS II C3 without having any issues with the batteries (nevertheless have the factory provided batteries on) or its all plastic N3 plug (as with some inexpensive Shutter Releases).
The receiver is truly quite compact and lightweight, so its absence of a protected attachment system was not a significant issue. Nonetheless, if you intend to use the set up mainly outdoors, where there are more odds the receiver might be accidentally dropped and misplaced in the field. I would relatively go for a small Velcro strip or dot to secure the receiver on the camera, just for precaution.
As Canon does not provide a related remedy, if you want a long range Remote Shutter manage, the YongNuo WRS II C3 may be a great resolution for you.

I hope you located the post helpful, thank you for viewing.
All Photos & Photosynths: © 2012-2013 S.C.Vlachos

Price tag & Availability
Prices for the YongNuo WRS fluctuate depending on the source and is offered from
Using earlier mentioned hyperlink(s) to make a buy you help support this web site.

Related Posts:
Aputure AP-TR3C (TC-80N3 appropriate) Timer Distant Controller for Canon
Shoot RS-80N3 suitable Distant Release Cable for Canon
Remote Shutter Terminal Converter Cable N3F to E3M for Canon
YongNuo RC-five Wireless Remote Control for Canon

No comments:

Post a Comment

Custom Search